The slim LOP 31 landing operating panel measures just 65x160x21 mm and comes with a unibody stainless steel enclosure. It’s surface-mounted on the landing door frame or on the wall and features TK Elevator’s tried and tested DB buttons with tactile symbols and stainless steel frontplates. In addition to the white confirmation light of the buttons, there’s also an acoustic acknowledgement with adjustable volume level. LOP 31 is also available with (euro) key switches or vandal-resistant VB push-buttons.
Series 30 landing operating panels and indicators
LOP 31
LIDC 31
The LIDC 31 landing direction indicator is elegantly integrated into the door portal of the cabin, travelling with the elevator. It signals the current direction to passengers by illuminating its 40 mm high up and down arrows, visible inside the cabin and to passengers in the landing upon arrival of the elevator. There’s also an integrated gong sound that indicates the travel direction to passengers acoustically. LIDC 31 is compatible with Series 50 operating panels.
LID 31
LID 31 combines the stainless steel unibody enclosure of the LOP 31 panel and the illuminating arrows of LIDC 31 into a landing direction indicator, surface-mounted on the landing door frame or the wall. It informs passengers awaiting the elevator about its current travel direction.
Push buttons
The Series 30 landing operating panel is available with TK Elevator’s popular DB series buttons with stainless steel faceplate, and the stainless steel and vandal-resistant VB series buttons.
Series 50 landing operating panels
LOP 51
With its brushed stainless steel faceplate and black polycarbonate enclosure the LOP 51 forms the basis of TK Elevator’s modular Series 50 operating fixtures. The surface-mounted landing operating panel fulfills all EN 81-70 requirements from the button luminance contrast to the acoustic input acknowledgement with adjustable volume level. Dimensions are 91x171x19 mm. Standard-equipped with round DB push-buttons, it can also be configured with (euro) key switches and vandal-resistant VB buttons.
LOP 52
LOP 52 extends the base panel with an additional module below that can accommodate either a single (euro) key switch or a push-button that can be used for special access functions. Dimensions are 91x261x19 mm.
LOP 53
LOP 53 extends the base panel with a display module on top. The glass-covered 3,5″ TFT screen shows the position and travel direction of the elevator. Dimensions are 91x261x19 mm.
LOP 50
LOP 50 simply does it all by combining the base panel with the keyswitch/button extension below, and the 3,5″ TFT display module on top. Dimensions are 91x350x19 mm.
Push buttons
The Series 50 landing operating panels are available with TK Elevator’s popular DB series buttons with stainless steel silver or black faceplate, and the stainless steel and vandal-resistant VB series buttons.
Series 50 landing indicators
LIP 50
The LIP 50 landing indicator panel is surface-mounted on the door lintel or wall, informing passengers of the current floor level position and travel direction of the elevator via two illuminating arrows and a TFT display. Black glass front with polycarbonate enclosure. Dimensions are 260x91x19 mm.
LID 50/51
The LID 50 landing indicator panel shows the current travel direction of the elevator with arrow LEDs. It’s surface mounted on the door frame or wall. Black glass front with polycarbonate enclosure. The variant LID 51 includes a gong signal. Dimensions are 91x101x19 mm.
LIDC 31
Although part of the Series 30 landing fixtures, the LIDC 31 landing direction indicator is compatible with Series 50, too. It is elegantly integrated into the door portal of the cabin, travelling with the elevator and signals the current direction to passengers by illuminating its 40 mm high up and down arrows.
Matching design with black glass front
All Series 50 landing operating panels are also available with a black glass faceplate instead of stainless steel, allowing you to create an exact visual match with the glass-covered Series 50 indicator panels.