Explore the technology and engineering of EOX Rebuild

Product
On
Off
Labels
Explore the interactive version of this page in the digital brochure
  1. 1

    European-made drive

  2. 2

    Energy recuperation

  3. 3

    Smart sensors

  4. 4

    Cabin design

  5. 5

    Controller in door jamb

  6. 6

    Sustainably made at TK Elevator’s European factories

  7. 7

    Wide range of door types

  8. 8

    Operating panels and indicators

  9. 9

    Reduced system weight

  10. 10

    Flexible door positioning

  11. 11

    Extra-reduced shaft head

  12. 12

    Optional 230V power supply

  1. European-made drive

    The EOX Rebuild powertrain is a state-of-the-art belt drive made in Europe. The ultra-compact machine is gearless and frequency-controlled. It makes for an exceptionally comfortable ride, moving passengers almost vibration-free.

  2. Energy recuperation

    Every EOX Rebuild elevator comes with a regenerative drive as a standard feature. When the cabin moves upwards without passengers or downwards fully loaded, energy is recuperated and fed back into the building grid for other electricity consumers to use.

  3. Smart sensors

    EOX Rebuild introduces new smart sensors connected to its powerful digital hardware: an optical sensor in the cabin to improve passenger safety, and an accelerometer to monitor the movement of the cabin and the doors to improve preventive maintenance.

  4. Cabin design

    Every EOX Rebuild elevator comes with a 7″ or 10″ multimedia display in the cabin operating panel. Already the most basic cabin design from Design line C features a large safety mirror and stainless steel handrail in the standard specification. Upgrade to Design lines B or A for a wider choice of materials and colours.

  5. Controller in door jamb

    The EOX Rebuild elevator controller is fully integrated in the door jamb instead of in a separate cabinet. If required, it can of course also be positioned away from the elevator shaft, for example to re-use existing wiring paths.

  6. Sustainably made at TK Elevator’s European factories

    EOX Rebuild is designed and produced at TK Elevator’s manufacturing centres in Europe. Our elevator production sites also run on 100% green electricity, contributing to a reduction of the carbon footprint of our products from the very beginning. For our packaging we use FSC®-certified materials.

  7. Wide range of door types

    For maximum flexibility, EOX Rebuild is available with either side-opening telescopic doors with 2 or 3 panels, or central-opening doors with 4 panels. The available door opening widths start at 700 mm, and increase in 50-mm increments up to 1000 mm.

  8. Operating panels and indicators

    The slim Series 30 landing operating panels feature a unibody stainless steel enclosure and are installed directly on the door frame. The optionally available Series 50 display and operating panels impress with their modular, versatile setup and extended selection in terms of design and buttons. For enhanced accessibility EOX Rebuild can also be equipped with a second horizontal COP with extra-large buttons and a matching landing operating panel.

  9. Reduced system weight

    A standard 630 kg, 5 stop EOX Rebuild configuration is 300 kg lighter than previous comparable offerings, achieved with clever engineering and zero compromise on safety and reliability. For the shipping from our manufacturing centre to installation sites, this weight reduction – the equivalent of a grizzly bear – saves 10% of CO2 emissions on average.

  10. Flexible door positioning

    EOX Rebuild lets you shift the door opening in the elevator cabin in 1 mm steps, for precise alignment with the existing openings of your lift shaft at the landings.

  11. Extra-reduced shaft head

    With this option, EOX Rebuild can fit easily in your current elevator’s shaft, and also underneath an existing machine room. When choosing this option, EOX Rebuild cabin comes with an integrated foldable working platform, enabling our service technician to perform maintenance tasks safely from within the cabin without having to board the cabin roof. Extra-reduced shaft head is available at 1.0 m/s even when flexible cabin dimensions are selected.

  12. Optional 230V power supply

    Instead of the traditional 400V, EOX Rebuild is also available with a 230V single-phase power supply. It’s a key advantage to free up capacity in your building’s electrical grid or reduce wiring efforts when fully renovating. EOX Rebuild with 230V does not require additional batteries or any other non-standard components. Available at up to 630 kg, 1.0 m/s.