Shaft layout
Values | |
---|---|
SD / SW | see dimensions pages |
SH | CH + 1180 mm (1 m/s) |
min. 3615 mm (1.6 m/s) | |
min. 3735 mm (1.75 m/s) | |
SH red. | CH + 400 mm (1 m/s) |
SP | min. 1000 mm (1 m/s) |
min. 1130 mm (1.6 m/s) | |
min. 1360 mm (1.75 m/s) | |
SP red. | min. 450 mm (1 m/s) |
TH | max. 40 m/min. 2900 mm (1 m/s) |
max. 75 m (>1 m/s) | |
HST | min. DH+450 mm / max. 11 m |
HST2 | min. 500 mm |
CH | 2000 – 2400 mm (≤1000 kg) |
2000 – 2500 mm (>1000 kg) | |
DH | 2000 – 2300 mm (≤1000 kg) |
2000 – 2400 mm (>1000 kg) | |
DW | 800 – 1000 mm (≤1000 kg) |
800 – 1400 mm (>1000 kg) |
Key | |
---|---|
SD | shaft depth |
SW | shaft width |
SH | shaft head |
SP | shaft pit |
red. | reduced shaft head / shaft pit |
TH | travel height |
HST(2) | min. height between floors |
CH | cabin height |
DH | door height |
FFL | finished floor level |
UFL | unfinished floor level |
Note: All shaft dimensions with standard tolerances. The values shown correspond to a generic installation under ideal circumstances. During the planning phase, all applicable regulations stipulated by relevant notified bodies and all applicable national regulations should be considered.