Series 50 landing operating panels

LOP 51

With its brushed stainless steel faceplate and black polycarbonate enclosure the LOP 51 forms the basis of TK Elevator’s modular Series 50 operating fixtures. The surface-mounted landing operating panel fulfills all EN 81-70 requirements from the button luminance contrast to the acoustic input acknowledgement with adjustable volume level. Dimensions are 91x171x19 mm. Standard-equipped with round DB push-buttons, it can also be configured with (euro) key switches and vandal-resistant VB buttons.

LOP 52

LOP 52 extends the base panel with an additional module below that can accommodate either a single (euro) key switch or a push-button that can be used for special access functions. Dimensions are 91x261x19 mm.

LOP 53

LOP 53 extends the base panel with a display module on top. The glass-covered 3,5″ TFT screen shows the position and travel direction of the elevator. Dimensions are 91x261x19 mm.

LOP 50

LOP 50 simply does it all by combining the base panel with the keyswitch/button extension below, and the 3,5″ TFT display module on top. Dimensions are 91x350x19 mm.

Push buttons

The Series 50 landing operating panels are available with TK Elevator’s popular DB series buttons with stainless steel silver or black faceplate, and the stainless steel and vandal-resistant VB series buttons.

Series 50 landing indicators

LIP 50

The LIP 50 landing indicator panel is surface-mounted on the door lintel or wall, informing passengers of the current floor level position and travel direction of the elevator via two illuminating arrows and a TFT display. Black glass front with polycarbonate enclosure. LIP 50 is available only for the main landing. Dimensions are 260x91x19 mm.

LID 50/51

The LID 50 landing indicator panel shows the current travel direction of the elevator with arrow LEDs. It’s surface mounted on the door frame or wall. Black glass front with polycarbonate enclosure. The variant LID 51 includes a gong signal. Dimensions are 91x101x19 mm.

LIDC 31

Although part of the Series 30 landing fixtures, the LIDC 31 landing direction indicator is compatible with Series 50, too. It is elegantly integrated into the door portal of the cabin, travelling with the elevator and signals the current direction to passengers by illuminating its 40 mm high up and down arrows.

Matching design with black glass front

All Series 50 landing operating panels are also available with a black glass faceplate instead of stainless steel, allowing you to create an exact visual match with the glass-covered Series 50 indicator panels.