Features and options

StandardOption
COMFORT
Accessibility
Door open/close and alarm push-button
Big push-buttons with Braille lettering (COP)
Round green frame in main floor push-button
Adjustable sound level (35-65 dBA)
Luminance contrast in fixtures
Acoustic request acknowledgement in the operating panel
Induction loop for hearing-impaired passengers
Access Control
Cancellation calls by double click in COP
Key switch in COP/LOP for access/functions
Preference / Independent service of COP
Out of service LOP
Penthouse control
VIP function
Prepared for card reader LOP/COP
COP for disabled persons
AGILE Access
Others
Car ventilation fan
CCTV multimedia travelling cable
Roller guides on car and counterweight
Cabin noise reduction kit
Floor light circuit
PERFORMANCE
Parking level in main landing floor
Group control system (up to 3 / up to 8 elevators)
AGILE Destination Controls and Design Center
Building management system (BMS) / Extended Building Management System
Machine 180 starts/hour (1 m/s)
Pre-opening of doors
Layout
Flexible car dimension in 10 mm-steps
Flexible door dimension in 100 mm-steps
Flexible door placement
Reduced overhead / reduced pit
ENERGY EFFICIENCY
Energy-saving LED lighting
Cabin lighting stand-by
Sleep mode
Regenerative drive
Trip Counter/Service metre
Highspeed/Eco mode
Selectable controller cabinet position
SAFETY & REGULATIONS
Prevention of empty car runs
Light curtain protection
Light curtain protection 3D
Emergency lighting in cabin 1 h
Automatic evacuation to next landing
Automatic evacuation to any landing
Two-/three-way intercom
Safety gear on counterweight
Water pit sensor
Halogen-free shaft wiring (except for the motor and travelling cable)
Doors fire rating EI-60 / EI-120
EN 81-20/50, Lifts construction and comp. testing
EN 81-21, Existing buildings
EN 81-28, Emergency call system
EN 81-70, Accessibility to lifts
EN 81-71, Vandal-resistant, Category 1 as a modification
EN 81-72, Fire fighter lift
EN 81-73, Fire evacuation
EN 81-77, Seismic, Category 0, 1, 2 and 3
DESIGN
Predesigned cabins
Glass walls finish
Custom cabin design: wall selection / raw cabin
Preparation for customer-supplied flooring
Stainless steel COP/LOP
Glass faceplate COP/LOP
Flush COP
TFT 7″ display in COP
LCD display in COP
Courtesy LED backlighting in COP
LOP, LIP and LDIP surface-mounted on door frame or wall
Landing doors in primed coating RAL 7032
Landing doors in powder coating RAL 9016, RAL 9006
Landing doors in ferritic stainless steel Gr.220D (AISI 441)
Landing doors in premium stainless steel
Cabin doors in ferritic stainless steel Gr.220D (AISI 441)
Cabin doors in premium stainless steel
Full panoramic cabin or glass rear wall
Framed or frameless glass doors

To discover all options available for evolution 300, please contact your local TK Elevator sales representative.

The details quoted in this sheet can only be viewed as binding when confirmed expressly in writing.