Panneaux d’appel palier Series 50

LOP 51

Avec sa plaque frontale acier inoxydable brossé et son boîtier en polycarbonate noir, le LOP 51 constitue la base des appareils de commande modulaires Series 50 de TK Elevator. Le panneau de commande palier en saillie répond à toutes les exigences de la norme EN 81-70, depuis le contraste de luminance des boutons jusqu’à l’accusé de réception acoustique des entrées avec un niveau de volume réglable. Équipé en standard de boutons-poussoirs ronds DB, il peut également être configuré avec des interrupteurs à clé (euro) et des boutons VB anti-vandalisme. Ses dimensions sont de 91x171x19 mm.

LOP 52

LOP 52 extends the base panel with an additional module below that can accommodate either a single (euro) key switch or a push-button that can be used for special access functions. Dimensions are 91x261x19 mm.

LOP 53

LOP 53 extends the base panel with a display module on top. The glass-covered 3,5″ TFT screen shows the position and travel direction of the elevator. Dimensions are 91x261x19 mm.

LOP 50

LOP 50 simply does it all by combining the base panel with the keyswitch/button extension below, and the 3,5″ TFT display module on top. Dimensions are 91x350x19 mm.

Boutons poussoirs

Les panneaux de commande Series 50 sont disponibles avec les célèbres boutons de la série DB de TK Elevator comprenant une plaque frontale en acier inoxydable argenté ou noir et les boutons en acier inoxydable et résistants au vandalisme de la série VB.

Indicateurs d’étage Series 50

LIP 50

The LIP 50 landing indicator panel is surface-mounted on the door lintel or wall, informing passengers of the current floor level position and travel direction of the elevator via two illuminating arrows and a TFT display. Black glass front with polycarbonate enclosure. LIP 50 is available only for the main landing. Dimensions are 260x91x19 mm.

LID 50/51

The LID 50 landing indicator panel shows the current travel direction of the elevator with arrow LEDs. It’s surface mounted on the door frame or wall. Black glass front with polycarbonate enclosure. The variant LID 51 includes a gong signal. Dimensions are 91x101x19 mm.

LIDC 31

Although part of the Series 30 landing fixtures, the LIDC 31 landing direction indicator is compatible with Series 50, too. It is elegantly integrated into the door portal of the cabin, travelling with the elevator and signals the current direction to passengers by illuminating its 40 mm high up and down arrows.

Design assorti avec plaque frontale en verre noir

Toutes les signalisations de palier Series 50 sont disponibles en option avec une plaque frontale en verre noir au lieu de l’acier inoxydable, ce qui vous permet de créer une correspondance visuelle exacte avec les panneaux indicateurs Series 50 en verre.